Mounting multiple panels together

Home Private: Forum Control Options Arduino Mounting multiple panels together

This topic contains 5 replies, has 3 voices, and was last updated by  Anonymous 4 years, 2 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #625


    I have four of the 8×16 panels from the Kickstarter. I am looking to mount them to a wall. I was thinking of something along the lines of the top one (“Profile 5 20 x 10”) at – but I think they’re too big (that’s the smallest they do, with 5mm holes in the nuts that fit in the slot, but my micrometer says the mounting holes in the panels are just under 4mm).

    What have you found that works?



    Weird, I’m sure I put this in the “Hardware” forum, not “Arduino”. Please move the topic to the appropriate place if necessary!



    I posted a 3D printable case on Thingiverse (
    that would work as a wall mount. It was built for 16×16 but can easily be adapted to
    meet your 4x8x16 application.



    Lee, Microrax has been designed to work with the RGB-123 panels. They have the best profiles and brackets you can find. I highly recommend them!

    • This reply was modified 4 years, 2 months ago by  ohararp.
    • This reply was modified 4 years, 2 months ago by  ohararp.


    bytemedwb: will check out adapting it, thanks!

    oharap: is there a missing link? I’m pretty sure I wasn’t designed to have panels mounted to me…



    I have no options to edit or delete a post, but, thanks for including the Microrax link!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.