Additional information
Weight | .25 lbs |
---|---|
Dimensions | 4 × 4 × 1 in |
$25.00
This is the mating receiver module for our Beaglebone Blask RS-485 Cape. Through the use of a single RJ45 cable four RS-485 buffered WS2812 signals can be transmitted over 1000+ meters. The outputs are terminated in either our standard 3 pin SIL header for easy connection to your RGB-123 matrix or via an RJ-45 connector at 5V. Power is derived the from the matrix panels or led strips allowing for simple and easy hookup. Power is routed through the individual jumper-solder pads to avoid ground loops.
*CAT6 Shielded cable is required for proper function.
Schematic – RGBNodeE+
25 in stock
Weight | .25 lbs |
---|---|
Dimensions | 4 × 4 × 1 in |